What one need to do is to copy the drawings on the Marine plywood using carbon paper and cut the pieces using a jigsaw.
The pieces have been sanded on edges and epoxied on both sides.
Mistakes: Do not epoxy the pieces on the exterior if you want a natural wood finish.
Do not screw the longitudinal pieces via the butt block.
Use only epoxy to join them, otherwise you will have a hard time covering the holes if you want a natural wood finish.
When drawing the pieces use the edge of the plywood sheet for the straight line especially for the lines that you will eventually join. If you draw close to this line, cutting with the jigsaw and sanding the edge will not produce a perfect line.
No comments:
Post a Comment